Engineers Shop - Bargain and Source Engineering Products

Detail : It will provide the esteemed platform for accessing the powder, granule and bulk solids technology and nanotechnology.

Hydraulic Cylinder is known as the mechanical actuator which is being used for giving the linear force through the linear stroke. It is being used for many, especially in engineering vehicles. Such cylinders gain their powers from the pressurized hydraulic fluid, which is basically the oil. Such cylinders consist of the cylinder barrel, through which the piston connects to the piston rod moving back and forth. The barrel gets closed on every end with the cylinder bottom and through the cylinder head in which the piston rod comes out of the cylinder. The piston consists of the sliding rings and have seals. The piston gets divide into the inside of the cylinder in two chambers, the bottom chamber and the piston rod side chamber. The hydraulic pressure acts on the piston to do linear work and motion. Flanges, trunnions, and/or clevisses are mounted to the cylinder body. The piston rod also has mounting attachments to connect the cylinder to the object or machine component that it is pushing.

Hydraulic Press is recognized as the hydraulic mechanism which is used for applying large lifting or compressive force. The hydraulic press is the hydraulic equivalent of the mechanical lever which is also referred to as the Bramah press. This name has been given after its inventor Joseph Bramah, from the country England. After the invented he issued the patent on the press in the year 1795. Hydraulic presses are considered as most frequently used modern press.

The working of hydraulic press depends upon the pascal's principle, in which the the pressure from the closed system remains constant. On one end of the system there is the piston having small cross sectional area driven through the lever for increasing the force. On the other hand there is small diameter tubing. Pressure at the confined fluid is then transmitted undiminished and with it acts through the equal force on the equal area and at the 90 degree of the container wall.

Battery Charger is defined as the device which is used for putting the energy into the secondary cell or the battery by exerting the electric current through it. The charge current is depend upon the technology and capacity of the battery which is charged. For e.g, the current which should be used to recharge the 12 V car battery will be differ from the current for a mobile phone battery. Usually a simple short circuit does not adversely affect the simple battery charger therefore it is considered the better source of the DC voltage for experimentation. However it is required an external capacitor for connecting across its voltage terminals in order to get the 'smooth' voltage sufficiently, which can be of a DC voltage plus a 'ripple' voltage added to it. Battery chargers can be classified into following categories-

To source Battery Charger one can refer the list of manufacturers and Suppliers of Battery Charger available at various online B2B Marketplaces.

Pinch Valve has been characterized as the full bore or fully ported control valve type which has no obstruction for passageway of flow. Pinch valves are various types, depending on the nature of their usage. Like fluids pinch valves, which is put to be used for fluids which has a device which is directed for controlling process tubing. With the tube forcing, it will create a seal which is equivalent to the tubing permeability. Particulates major parts of the pinch valve includes of the body and sleeve. The sleeve compasses of the body and sleeve. The sleeve will encompasses of the flow media and then isolate the from the rest of the environment which in turns reduce the contamination to the environment. It is more commonly used for slurries or for various process which has entrained solids. Pinch valves can be considered as the good valve for the flow controlling application, provided the operation temperature is under the polymer limit.

Venue : Bangalore International Exhibition Centre(BIEC), Bangalore , Karnataka, India

Detail : Known as one of the largest exhibition with a focus on the mechanical components, materials and on various other technologies.

Detail : It would be attended by the eminent players from the machine tools, automotive, chemicals, textiles and iron and steel industry.

Detail : The industrial platform for disseminating the information about the latest technology and new innovations in throughout the world.

Camshafts have been characterized as the apparatus which is used in the piston engines for operating the poppet valves. It encompasses of the cylindrical rod, which is running the length of the cylinder bank and have a number of oblong lobes or cans which protrude from it, one for every valve. The force generated by the cam opens the valves with its pressing or due to some other intermediate mechanism with their rotation. The first ever known camshafts and cam were discovered in Iraq and in year 1206 Al-Jazari described them. Later on in 14th century or earlier they were appeared in the European mechanism.

On the basis of the camshafts location, the cams either operate the valves directly or through the push rods and rockers linkages. Direct operation demands the simple mechanism and results into less chances of failures but camshafts are needed to be positioned on the cylinders top. In some engines 2 camshafts are used for intaking and exhausting of valves.

To source different types of Camshafts one can refer the list of manufacturers and Suppliers of Camshafts available at various online B2B Marketplaces.

Control Valves are characterized as those valves which are generally used in the industrial plants for controlling the operating conditions like temperature, pressure, flow with the complete or partial opening or closing in response to the received signals from the controllers which are used for comparing the set point to the process variable to those values which are being provided by the sensors which in turns is busy in monitoring the changes of such conditions. Electrical, hydraulic or pneumatic systems are used for opening and closing of the control valves. Positoners are also used which helps in controlling the opening or closing of the actuator, which are based on the electric or pneumatic signals.

To source different types of Control Valves one can refer the list of manufacturers and Suppliers of Control Valves available at various online B2B Marketplaces.

Diaphragm Valves have the valve body, having 2 or more than ports- a diaphragm and saddle. It is constructed either with the help of plastic or steel. Mainly the diaphragm valve or membrane valve was developed to be used for the various non-hygienic work. Afterward the design was put to be used in the bio-pharmaceutical industry with the help of the compliant materials which has the ability to withstand sanitizing and sterilizing methods. Diaphragm valves can be divided under two heads- one type seals over a weir(saddle) and the seals over a seat. The saddle type is more prevalently used in various process applications whereas the seat type has the in/out ports which are situated at the 90 degree from each other. Diaphragm valves are usually come in the two port forms but they can also be find as the third ports and more. Such valves can be controlled with the help of various actuators.

To source different types of Diaphragm Valves can refer the list of manufacturers and Suppliers of Diaphragm Valves available at various online B2B Marketplaces.

Poppet valves are considered to be very robust and has resilient construction, which is in turn is used for the industrial directional control valves. These are found to be high tolerant of the typical air line contaminants when they are being used for the compressed air service. Such type of valve construction has been identified of being the high flow, which show fast acting design due to the large flow paths from the body which can be opened quickly. It has the large openings that help passing of the particulate from the valve at great ease.

To source different types of Poppet Valve one can refer the list of manufacturers and Suppliers of Poppet Valve available at various online B2B Marketplaces.

Solenoid Valve is known as the electromechanical valve which is put to be used with the liquid or gas controlled either by the running or with the stopping of the electric current through the solenoid, which is in turns the coil of wire and as result change the valve state. Solenoid valve may consist of 2 or more ports. If it is the 2-port valve then the flow will be switched either on/off but in the case of the three-port valve, the outflow switches in between of the 2 outlet ports. It is possible to place the multiple solenoid valves on the manifold. Such valves are known as the most preferentially used control elements in the fluidics. They are used for shutting off, releasing, doing, distributing or mixing fluids. These are found to be used in varied uses. Solenoids have been characterized as the speedy and safe switching, great reliability, longer service life shell with the advantages of low controlling power and compact designing. The solenoid valve has 2 integral parts-solenoid and valve.

The 2-way solenoid valve use can be seen in the central heating. Such type of valves have been found essentially useful when there are multiple heating zones and they are fed by the single source of heat. Solenoid valves are useful in the automatic irrigation sprinkler systems. These valves are highly useful for controlling the air and fluid flow.

To source different types of Solenoid Valve one can refer the list of manufacturers and Suppliers of Solenoid Valve available at various online B2B Marketplaces.

Plug Valve is characterized as the valves which have cylindrical or conically tapered 'plugs', that can be rotated inside the valve body with an aim of controlling the flow through the valve. The plugs of plug valves consist of 1 or more hollow passageways on the sideways through the sideways, which in turns facilitates the flowing of fluid from the plug in case the valve is open, It is also possible that the plug valves have more than 2 ports. In the case of 3 way-plug valve, flow of the port can be directed either to the second or third port. The 3 way plug valve can also be designed for shifting the flow between the ports 1&2, 2&3 o 1&3 or it might connect all the 3 ports together. One of the most simplest type of pug valve is the 2-port valve, which includes of the two position-open to allow flow and second is shut for stopping the flow. The ports in plug valves are the openings in the valve body which allows entry and exit of fluid. Such plug in this type of valve includes of the passageway going through it. Stopcocks, which are used in the laboratory glassware, are considered to be part of the conically tapered plug valves. When it is fused with the glassware, the valve bodies are made up of glass. Otherwise, inert plastic can be used for their making like teflon.

Detail : The event is focused towards exploring the new trading opportunities in the mining and machinery industry and provides the vital platform to finalize the prospective dealings.

Venue : Hyatt Regency Kolkata, Kolkata, West Bengal, India

Detail : It unveils the scenario of the Indian power industry on the global front and brings together the technocrats stalwarts leaders.

Butterfly Valves have been characterized as the flow control device which is generally used for regulating the flowing of fluid from the section of pipe. It has the flat circular plate which is positioned in the center of pipe. The plat contains of the rod which is connected with the actuator on the outer side of valve. The rotation of the actuator also turn the pipe either in parallel or the perpendicular way to the flow. In butterfly valve the plate is always present within the flow as a result the pressure drop is always in the position of inducing the flow irrespective of the position of valve.

To source different types of Butterfly Valves one can refer the list of manufacturers and Suppliers of Butterfly Valves available at various online B2B Marketplaces.

Gate Valves or sluice valve, are characterized as the valve which opens up with the help of lifting of the round or rectangular gate/wedge from the fluid path. One of the noted feature of the gate valve is the sealing surface which falls in between the gate and seats are seen as the planar. The gate faces are capable of forming the wedge shape or they can either be parallel. Sometimes gate valves are also used for controlling and regulating flow but many gate valves are generally not suitable for this purpose, having been designed in the manner which is either fully opened or closed. When gate valves are open fully the typical gate valves face no obstruction in the path flow which in turns result into the loss of very low friction. Gate valves are known as having either high or non rising stem. The rising stem gives rise to the visual indication of the valve position. Non rising stems are put into use in those situation where vertical space is limited or in underground. Gate valves generally consist of the flanged ends which are drilled as per the pipeline compatible flange dimensional standards. Typically gate valves are manufactured from the cast iron, ductile iron, gun metal, cast carbon steel, stainless steel, alloy steels and forged steels.

To source different types of Gate Valves one can refer the list of manufacturers and Suppliers of Gate Valves available at various online B2B Marketplaces.

Ball Valve is the valve which has been characterized as the valve which opens up due to the turning of the handle attached to the ball inside the valve. The ball comes with the port through the middle therefore at the time when the port is in the line on both the ends of the valve, flow will occur. At the time of closing of the valve, the hole is perpendicular with the end of the valve and thus flow gets blocked. Ball valves are considered to be durable and is generally put to be in use for achieving the perfect shutoff even after many years of its misuse. Therefore, they are considered to be the excellent source choice of the shutoff applications. Due to their characteristics of versatility, ball valves are efficiently used in the industries. These can be easily repaired and can be operated manually or by the actuators. Ball valves may be made up of the metal, plastic or metal with the ceramic center.

To source one can refer the list of manufacturers and Suppliers of Ball Valve at online B2B Marketplaces.

Carburetor is the device which is used for blending air and fuel for the internal combustion engine. Invented by the Karl Benz before 1885, carburetor was patented in the year 1886. The word 'carburetor', is derived from the french word 'carbure', which means 'carbide'. Thus it means 'to combine with carbon.'In the North America and the United Kingdom, it is colloquially called the carb or carby. The working of carburetor is depend on the Bernoulli's principle, which means that the more faster the air movement, the lower would be its static pressure and the higher its dynamic pressure. When it is used in aircrafts with piston engines, special designs and features are required for preventing fuel starvation during inverted flight. While most of the carburetors come with only one venturi, there are many such carburetors which have more than one venturi or 'barrel'. 2 barrel and 4 barrel configurations are used for accommodating the higher air flow rate with the large displacement of engine.

Chassis encompasses of the framework which acts as the supporting system to the inanimate object, like in the motor vehicle. In vehicles, 'chassis' implies to the frame plus the 'running gear' like engine, transmission, drive shafts differential and suspension. That part of the body which is considered not so 'required' for the integrity of the structure is manufactured on the chassis for completing the vehicle. Inc case of commercial vehicles manufacturers, they can have ' chassis only', 'cowl and chassis' with 'cab and chassis' versions, which is usually used with the specialized bodies. The chassis of tank consists of the upper hull with a motive of giving meaning the tank without the gun turret. It is used for serving the basis of tank converted platforms like armored personnel, combat engineering vehicles etc.